How to Wax your Eyebrows at Home?

Pharmacy Product

Step 1:

Measure

All Surgical Glove

Step 2:

Heat

All Surgical Glove

Step 3:

Clean, Prepare, Wax

Watch the video!

Watch our
5 minute tutorial

And learn how to wax your eyebrows at home.

Carefully read instructions and contraindications before waxing

STEP 1 - MEASURE

Refer to our fabulous Beads Measuring Chart. Easy to follow, simply use the large and small cups to measure the amount of wax beads you will need.
For the eyebrows pour 1 large and 1 small cup-full of Happy Waxing Beads into your empty pink tin.
Place the tin into the heater. Never pour the wax directly into the wax warmer, always use your pink tin.

STEP 2 - HEAT

HEAT
Plug in your Happy Waxing heater, place the lid on and flip on the switch. The wax will take approximately 20-30 minutes to melt.
STIR THE WAX
To ensure even heat and achieve a creamy texture, occasionally stir the wax with a wooden spatula. You may notice the heaters red light will turn on and off. This is normal and is maintaining the temperature of the heater.

The heater will only be warm to the touch-but the tin itself can become hot.
HEAT TEST
Before waxing, apply a small amount of wax to your inner wrist using the spatula.

If the wax is too warm, switch off the heater and allow it to cool for a few minutes. Then turn the heater back on and re-test for comfort.

STEP 3 - CLEAN & PREPARE & WAX

CLEAN
When waxing the eyebrows, sit on on a flat, stable seat, in front of a mirror, to easily see your wax application.

Using a tissue or cotton, cleanse the area to be waxed with the Happy Waxing Clean Purifying Lotion. Notice the direction of hair growth.
Tip
For best results, be sure the hair is at least 1/8" long.
PREPARE
Prepare the skin by applying just a tiny drop of Happy Waxing Prepare Nourishing Oil.
WAXING THE EYEBROWS IN 2 SECTIONS
For under the brow: apply wax from the inner corner to the tail of the eyebrow.

For between the eyebrows: apply wax from the bottom to the top. To achieve beautiful eyebrows and to maintain symmetry, take into account the structure of your brow bone.
DIP THE SPATULA
Dip the spatula into the wax, wipe the underside of the spatula against the inner edge of the tin to remove excess wax. Roll and turn the spatula a few times to disconnect the wax and to prevent dripping.
UNDER THE BROW
Stretch your eyebrow with one hand, with the other hand using a small spatula, apply a small amount of Happy Waxing wax from the inner corner to the end of the eyebrow. Apply in a smooth, continuous motion, in the direction of hair growth. The application should be thin, leaving a thicker edge which makes the wax easier to lift when removing. Roll and turn your spatula to disconnect the wax and prevent strings.
NO STRIPS NEEDED!
Allow the wax to harden for a few seconds. Touch the wax to make sure it is dry and ready for removal.

Hold your skin taut with one hand which will make the removal much more comfortable. With the other hand, lift the edge of the wax, staying parallel to the skin remove in a quick swift movement in the opposite direction of the hair growth.
BETWEEN THE EYEBROWS
To wax between the eyebrows, apply a small amount of wax from the bottom upwards.

Remove the wax, parallel to the skin, against the direction of hair growth.
CLEAN
After waxing, apply Happy Waxing® Clean Purifying Lotion.
CLEAN
Apply a drop of Happy Waxing® Prepare Nourishing Oil and massage into skin to soothe and remove any wax residue.
YOU DID IT
Congratulations! Flip off the switch and unplug your Happy Waxing heater.
Allow time for the wax to harden
There is no need to clean out the tin. Your tin is ready for its next use! Simply add the Easy-To-Fill and Refill Happy Waxing Beads!

Store your Happy Waxing Heater with its lid on to protect your wax.
OUR TIP
Should wax drip on your heater, the Happy Waxing Nourishing Oil can be used to wipe it clean. Be sure to wipe down the heater as the oil can make it slippery!